Products Banner

Gladon Orange Foam Bond Spray Adhesive

Gladon's Orange Spray Adhesive

No CFC's
Fast Tack
Orange Color
Pressure Sensitive
High Volume Spray
No Methylene Chloride
Economical Alternative to 3M Orange 74
Specially Designed for Use With Wall Foams

Gladon Orange Foam Bond spray adhesive was specifically designed for use by the pool professional to bond polyethylene wall foam to a wide variety of surfaces including metal, wood, concrete, and more. Orange Foam Bond adhesive is tinted orange to allow the user to easily see where it has been applied. Gladon Orange Foam Bond is preferred by pool professionals because of its fast tack, high volume lace or web spray pattern, low soak-in, and high bond strength. Spray Orange Foam Bond on both surfaces, to achieve a permanent bond in as little as 15 minutes. For longer working times and a repositionable adhesive, chose Gladon Blue Foam Bond. Unlike 3M Orange 74, Foam Bond is made in the USA. Orange Foam Bond is packaged in a self selling counter top display carton. Coverage for most applications is 200 to 250 sq. ft. per can.

(Note: Do not use where a vinyl liner may come in direct contact with the adhesive, or bleed through may occur. Heavy application may delay flashing off of solvents and delay bonding time.)

VOC Compliant For All StatesLink To Material Safety Data Sheet



Case of 12 - 24oz Spray Cans ORFB 24

[Dividing Line Image] Gladon Co.

Click on a link below
Link To Homepage Link To News Page Link To Product Index Link To Pool Setup Information Link To Reference Information Link To Information Request Page Link To Contact Page
Send mail to with questions or comments about this web site. Last modified: May 23, 2014